Baer 6R Offroad Caliper

Designed specifically for competition use in the extremely demanding world of Trophy Truck, off-road racing; Baer Brake System, Inc.’s newest addition to their already highly competitive line of Off-Road, competition calipers has many features that make it the best choice for Trophy Truck and other full-size truck, off-road race classes. Larger than their 6P and 6PSC calipers designed specifically for Class One Desert and Pro 2 and Pro 4, Short Course competition; this caliper has a higher thermal saturation point for increased fade resistance in higher vehicle weight (4000+lbs.) applications.   

Baer Brake Systems, Inc. has developed a manufacturing process that allows them to build mono-block 6-piston calipers out of 2618 aluminum forgings that offer many of the benefits of the world’s top level competition calipers that can cost up to twice as much!

Features such as…

  • One-piece, “mono-block” forgings, providing the stiffest possible caliper design to reduce radial pad taper and provide the best possible “feedback” to the driver for maximum control
  • Internal cross-over design prevents brake fluid circulation restrictions due to external damage from debris commonly associated with external cross-over “tubes”
  • Stainless steel, staggered bore pistons virtually eliminate end to end pad taper and offer superior thermal shielding to minimize the effects of brake pedal fade due to brake fluid boiling
  • Pressure and wiper seals offer superior protection against contamination and dust while offering controlled pad pull back, resulting in consistent pedal position, turn after turn, lap after lap.
  • Incorporating both “bridge bolts” and a “quick change clip”, it allows the use of either “bridge bolts” for superior stiffness, or the ability to run the caliper without bridge bolts to allow quick pad changes in endurance applications. This is an industry first, and a Baer Brake Systems, Inc. exclusive!
  • Radial mounting, offering the most flexibility in mounting configurations and the most secure method of attachment.
  • Anodized in a “hard-coat”, mil-spec. finish, the finish offers superior abrasion resistance.
  • Light weight in design, just 8lbs. 1oz. the 6R caliper has a power to weight ratio that is well suited for competition use where un-sprung weight may be of concern.
  • Designed for rotor diameters of 13.5” (343mm) to 16” (406mm) by 1.250” (31.75mm) thick.
  • Long pad shape maximizes brake “torque” by placing the bulk of the pad friction surface further out away from the hub centerline.

 

Recommended for applications where maximum braking is required and for competition vehicles weighing over 4000lbs. This is the caliper currently being used by Geiser Brothers Design and Development for their Trophy Truck applications.

All these features at just $1,495.00, Racer Net!