The SS4 and SS4+ front and rear systems are specifically designed for early GM, Ford and Mopar muscle car applications. Utilizing Baer’s newest S4 - 4-piston caliper, front systems are mated to 11” diameter, slotted, drilled, zinc plated, and vented 2-piece rotors. SS4+ front systems come with everything needed for installation including vehicle specific stainless steel braided brake hoses*; billet aluminum hubs with bearings and seals, pre-installed - packed in Redline™ synthetic grease and all necessary mounting hardware. The SS4+ front system packs a lot of punch in a system designed to fit in 14” and 15” wheels.** This system is ideally suited for “Resto-Mod”, Drag Racing, Street-Strip and other applications where 14” and 15” diameter wheels are preferred to achieve that “Period-Correct” or “Street-Strip” look.

Rear systems use our S4 rear specific calipers with correctly matched piston area’s to ensure proper brake bias when used with any of Baer’s Extreme Plus, Pro Plus, Track4 or SS4+ front systems, and are mated to 12” one-piece or 13” two-piece slotted, drilled and zinc plated rotors. SS4 and SS4+ rear systems include “drum style” park brake mechanisms for superior holding power, and a clean, clutter free look. Designed to fit 15” or larger wheels**, the SS4 rear system is the perfect match for Baer’s SS4+ and Track4 front system’s, while the SS4+ with its larger 13” 2-piece rotors are a perfect match for Baer’s Pro-Plus and Extreme Plus front system’s and are designed to fit most 17” or larger wheels.**

As with all Baer brake systems, these systems are meant to be driven on the track and on the street! Unlike our competitors, you will never see a disclaimer on the box stating “Not for Street Use”. The S4 calipers used in the SS4+ systems have pad anti-rattle clips, dust and weather seals and are fully DOT compliant. SS4+ systems also utilize vented rotors instead of “solid” disc’s for proper cooling and maximum fade resistance whether “On-Track” or Cruisin’ the Boulevard! Track widths in most applications remain unchanged as well®. This means stock wheel off-sets and suspension geometry are maintained.

So if you are looking for a Street Legal, lightweight, Drag Strip or Autocross compatible brake system, look no further. Baer has the solution you are looking for! SS4+ front systems are available in standard “clear” anodized finish with the red Baer logo starting at just $895.00. Powder coated and Nickel plated versions are also available starting at $995.00. SS4 vehicle specific rear system’s start at just $1,195.00 and the larger, 2-piece rotor, SS4+ systems start at just $1,295.00. Please contact one of our knowledgeable sales and tech support team members at 1-602-233-1411 for information on the correct system for your application. *Baer “General Fit” systems do not include brake hoses. **Always confirm wheel fitment with a Baer, brake fit template by calling 1-602-233-1411 and requesting we email or snail-mail one to you. ®Call Baer’s technical support line at 1-602-233-1411 for specific track width changes on your specific vehicle.